Mixing valve detail GW
Mixing valve detail KL300 MultiWinch
Mixing valve detail GW
We are happy to help you with making a calculation
Get in contact with usFans placed directly in front of a duct result in relatively poor air distribution. Outside air ventilation must be complemented by internal ventilation. A mixing plant mixes outdoor air with internal air from the storage area. Special mixing valves are operated by drives and are often controlled independently by a climate or crop computer.
- For optimal mixing of indoor and outside air.
- Possibilities for extra accuracy.
- Various motor gearboxes can be used.
- Powerful motors for operating multiple valves.
- Cost-effective solutions.
GW motor gearbox
| Article | Description | T (50/60Hz) [Nm] | L [mm] | D [mm] | P (50/60Hz) [kW] | I (@ Δ) (50/60Hz) [A] | I (@ Y) (50/60Hz) [A] | m [kg] |
| P.GW10.3.230.26.KW | GW10 2.6 1ph 230V with CW+CH 10B z16 | 100 / - | 168 | 124 | 0,09 / - | - | 0,9 / - | 21 |
 2 P.GW10.3.230.26.KW 11 GW10 2.6 1ph 230V with CW+CH 10B z16 13 14 P.GW10.400.26.KW.jpg 15 16 CAT_P.GW10.400.26.KW_2D.gif 17 10 | ||||||||
| P.GW10.3.400.26.KW | GW10 2.6 3ph 400V with CW+CH 10B z16 | 100 / 80 | 168 | 124 | 0,09 / 0,11 | 0,7 / 0,7 | 0,4 / 0,4 | 21 |
2 P.GW10.3.400.26.KW 11 GW10 2.6 3ph 400V with CW+CH 10B z16 13 14 P.GW10.400.26.KW.jpg 15 16 CAT_P.GW10.400.26.KW_2D.gif 17 10 | ||||||||
| P.GW30.2.230.26.KW | GW30 2.6 1ph 230V with CW+CH 10B z16 | 300 / - | 220 | 145 | 0,12 / - | - | 1,3 / - | 21 |
 2 P.GW30.2.230.26.KW 11 GW30 2.6 1ph 230V with CW+CH 10B z16 13 14 P.GW30.400.26.KW.jpg 15 16 CAT_P.GW30.400.26.KW_2D.gif 17 10 | ||||||||
| P.GW30.400.26.KW | GW30 2.6 3ph 400V with CW+CH 10B z16 | 300 / 240 | 220 | 145 | 0,25 / 0,30 | 1,4 / 1,4 | 0,8 / 0,8 | 24 |
2 P.GW30.400.26.KW 11 GW30 2.6 3ph 400V with CW+CH 10B z16 13 14 P.GW30.400.26.KW.jpg 15 16 CAT_P.GW30.400.26.KW_2D.gif 17 10 | ||||||||
| P.GW40.2.230.26.KW | GW40 2.6 1ph 230V with CW+CH 10B z16 | 400 / - | 220 | 137 | 0,25 / - | - | 3,2 / - | 29 |
 2 P.GW40.2.230.26.KW 11 GW40 2.6 1ph 230V with CW+CH 10B z16 13 14 P.GW80.400.26.KW.jpg 15 16 CAT_P.GW80.400.26.KW_2D.gif 17 10 | ||||||||
| P.GW40.400.26.KW | GW40 2.6 3ph 400V with CW+CH 10B z16 | 400 / 320 | 220 | 159 | 0,37 / 0,44 | 1,7 / 1,7 | 1,0 / 1,0 | 29 |
2 P.GW40.400.26.KW 11 GW40 2.6 3ph 400V with CW+CH 10B z16 13 14 P.GW80.400.26.KW.jpg 15 16 CAT_P.GW80.400.26.KW_2D.gif 17 10 |
Article number
Description
GW10 2.6 1ph 230V with CW+CH 10B z16
T (50/60Hz) [Nm]
100 / -
L [mm]
168
D [mm]
124
P (50/60Hz) [kW]
0,09 / -
I (@ Δ) (50/60Hz) [A]
-
I (@ Y) (50/60Hz) [A]
0,9 / -
m [kg]
21
Article number
Description
GW10 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
100 / 80
L [mm]
168
D [mm]
124
P (50/60Hz) [kW]
0,09 / 0,11
I (@ Δ) (50/60Hz) [A]
0,7 / 0,7
I (@ Y) (50/60Hz) [A]
0,4 / 0,4
m [kg]
21
Article number
Description
GW30 2.6 1ph 230V with CW+CH 10B z16
T (50/60Hz) [Nm]
300 / -
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,12 / -
I (@ Δ) (50/60Hz) [A]
-
I (@ Y) (50/60Hz) [A]
1,3 / -
m [kg]
21
Article number
Description
GW30 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
300 / 240
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,25 / 0,30
I (@ Δ) (50/60Hz) [A]
1,4 / 1,4
I (@ Y) (50/60Hz) [A]
0,8 / 0,8
m [kg]
24
Article number
Description
GW40 2.6 1ph 230V with CW+CH 10B z16
T (50/60Hz) [Nm]
400 / -
L [mm]
220
D [mm]
137
P (50/60Hz) [kW]
0,25 / -
I (@ Δ) (50/60Hz) [A]
-
I (@ Y) (50/60Hz) [A]
3,2 / -
m [kg]
29
Article number
Description
GW40 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
400 / 320
L [mm]
220
D [mm]
159
P (50/60Hz) [kW]
0,37 / 0,44
I (@ Δ) (50/60Hz) [A]
1,7 / 1,7
I (@ Y) (50/60Hz) [A]
1,0 / 1,0
m [kg]
29
Tube bolt sprocket
| Article | Description | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.BBKWL10B.Z16.D100 | Tube bolt sprocket 10B z16 - 1" | 420 | 34 | 96 | 150 | 0,8 |
 2 P.BBKWL10B.Z16.D100 13 Tube bolt sprocket 10B z16 - 1" 15 16 P.BBKWL10B.Z16.D100.jpg 17 10 CAT_P.BBKWL10B.Z16.D125_2D.gif |
Article number
Description
Tube bolt sprocket 10B z16 - 1"
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
150
m [kg]
0,8
Weld sprocket
| Article | Description | Chain | Shaft | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.LKWL10B.Z16.D100 | Weld sprocket 10B z16 - 1" and 2" | 10B z16 | D100 | 420 | 34 | 96 | 30 | 0,5 |
 2 P.LKWL10B.Z16.D100 11 Weld sprocket 10B z16 - 1" and 2" 12 13 P.LKWL10B.Z16.D100.jpg 15 16 CAT_P.LKWL10B.Z16.D100_2D.gif 17 10 |
Article number
Description
Weld sprocket 10B z16 - 1" and 2"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
30
m [kg]
0,5
Mounting plates
| Article | Description | A [mm] | H [mm] | m [kg] |
| P.MP.GW.H.A90 | Mounting plate GW right angle A90 H101 | 90 | 101 | 1,9 |
| P.MP.GW.H.A100 | Mounting plate GW right angle A100 H111 | 100 | 111 | 2,0 |
| P.MP.GW.H.A122 | Mounting plate GW right angle A122 H133 | 122 | 133 | 2,2 |
Article number
Description
Mounting plate GW right angle A90 H101
A [mm]
90
H [mm]
101
m [kg]
1,9
Article number
Description
Mounting plate GW right angle A100 H111
A [mm]
100
H [mm]
111
m [kg]
2,0
Article number
Description
Mounting plate GW right angle A122 H133
A [mm]
122
H [mm]
133
m [kg]
2,2
THG30 gearcase
| Article | Description | T [Nm] | s [mm/rev] | Usage | m [kg] |
| P.THG30.UNIT.U | THG30 Universal | 10,4 | 138,23 | Intens | 0,43 |
Article number
Description
THG30 Universal
T [Nm]
10,4
s [mm/rev]
138,23
Usage
Intens
m [kg]
0,43
THG30 rack
| Article | Description | F [N] | L [mm] | D [mm] | B [mm] | m [kg] |
| P.THG30.3.L797 | THG30 rack 3 mm L=797 mm | 450 | 797 | 25 | 3 | 1,2 |
 2 P.THG30.3.L797 11 THG30 rack 3 mm L=797 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L998 | THG30 rack 3 mm L=998 mm | 450 | 998 | 25 | 3 | 1,5 |
2 P.THG30.3.L998 11 THG30 rack 3 mm L=998 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1099 | THG30 rack 3 mm L=1099 mm | 450 | 1099 | 25 | 3 | 1,7 |
2 P.THG30.3.L1099 11 THG30 rack 3 mm L=1099 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1300 | THG30 rack 3 mm L=1300 mm | 450 | 1300 | 25 | 3 | 2,0 |
2 P.THG30.3.L1300 11 THG30 rack 3 mm L=1300 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1400 | THG30 rack 3 mm L=1400 mm | 450 | 1400 | 25 | 3 | 2,2 |
2 P.THG30.3.L1400 11 THG30 rack 3 mm L=1400 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1500 | THG30 rack 3 mm L=1500 mm | 450 | 1500 | 25 | 3 | 2,2 |
2 P.THG30.3.L1500 11 THG30 rack 3 mm L=1500 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif |
Article number
Description
THG30 rack 3 mm L=797 mm
F [N]
450
L [mm]
797
D [mm]
25
B [mm]
3
m [kg]
1,2
Article number
Description
THG30 rack 3 mm L=998 mm
F [N]
450
L [mm]
998
D [mm]
25
B [mm]
3
m [kg]
1,5
Article number
Description
THG30 rack 3 mm L=1099 mm
F [N]
450
L [mm]
1099
D [mm]
25
B [mm]
3
m [kg]
1,7
Article number
Description
THG30 rack 3 mm L=1300 mm
F [N]
450
L [mm]
1300
D [mm]
25
B [mm]
3
m [kg]
2,0
Article number
Description
THG30 rack 3 mm L=1400 mm
F [N]
450
L [mm]
1400
D [mm]
25
B [mm]
3
m [kg]
2,2
Article number
Description
THG30 rack 3 mm L=1500 mm
F [N]
450
L [mm]
1500
D [mm]
25
B [mm]
3
m [kg]
2,2
THG30 window bracket
| Article | Description | m [kg] |
| P.THG30.RB | THG30 aluminium window bracket | 0,06 |
Slide bearing plate
| Article | Description | A [mm] | H [mm] | L [mm] | m [kg] |
| P.GL100.H.L150 | Slide bearing plate 1" H A92 L150 mm | 92 | 125 | 150 | 0,2 |
| P.GL100.H.L158 | Slide bearing plate 1" H A100 L158 mm | 100 | 133 | 158 | 0,2 |
| P.GL100.H.L180 | Slide bearing plate 1" H A122 L180 mm | 122 | 155 | 180 | 0,2 |
Article number
Description
Slide bearing plate 1" H A92 L150 mm
A [mm]
92
H [mm]
125
L [mm]
150
m [kg]
0,2
Article number
Description
Slide bearing plate 1" H A100 L158 mm
A [mm]
100
H [mm]
133
L [mm]
158
m [kg]
0,2
Article number
Description
Slide bearing plate 1" H A122 L180 mm
A [mm]
122
H [mm]
155
L [mm]
180
m [kg]
0,2
Encoder I-DE
| Article | Description | n [rpm] | m [kg] |
| P.IDE.024.01 | I-DE 24V AC/DC digital/analogue Enc. built-in | 1,2 - 8,0 | 0,06 |
Article number
Description
I-DE 24V AC/DC digital/analogue Enc. built-in
n [rpm]
1,2 - 8,0
m [kg]
0,06
Potentiometer
| Article | Description | Ohm [ohm] | m [kg] |
| P.PM.500 | Potentiometer 500 ohm built-in | 500 | 0,037 |
| P.PM.1000 | Potentiometer 1000 ohm built-in | 1000 | 0,037 |
| P.PM.5000 | Potentiometer 5000 ohm built-in | 5000 | 0,037 |
| P.PM.10000 | Potentiometer 10 000 ohm built-in | 10000 | 0,037 |
| P.PM.2000 | Potentiometer 2000 ohm built-in | 2000 | 0,037 |
Potentiometer gear set
| Article | Description | i [-] | m [kg] |
| P.PM.TWS.6,00 | Gear set 30.32.48.30 | 6,00 | 0,10 |
| P.PM.TWS.7,20 | Gear set 68.34.30.48 | 7,20 | 0,13 |
| P.PM.TWS.8,16 | Gear set 30.17.30.48 | 8,16 | 0,10 |
| P.PM.TWS.9,60 | Gear set 30.20.30.48 | 9,60 | 0,10 |
| P.PM.TWS.10,08 | Gear set 30.21.30.48 | 10,0 | 0,10 |
| P.PM.TWS.11,04 | Gear set 30.23.30.48 | 11,0 | 0,10 |
Drive systems for ventilation
Crop retention is about much more than simply storage. Ideal air conditions are required at each stage of storage to dry, cool and maintain tubers at temperature. This stops diseases from developing, suppresses germination and maintains quality. Especially for use in storage areas, De Gier offers the perfect drives: in combination with the storage area climate computer, extra precise motion of the drives that control temperature and humidity for a refined and optimal storage climate.
Mixing valve detail KL300 MultiWinch
We are happy to help you with making a calculation
Get in contact with usFans placed directly in front of a duct result in relatively poor air distribution. Outside air ventilation must be complemented by internal ventilation. A mixing plant mixes outdoor air with internal air from the storage area. Special mixing valves are operated by drives and are often controlled independently by a climate or crop computer.
- For optimal mixing of indoor and outside air.
- Possibilities for extra accuracy.
- Various motor gearboxes can be used.
- Powerful motors for operating multiple valves.
- Cost-effective solutions.
KL300 MultiWinch
| Article | Description | T [Nm] | n [rpm] | P [VA] | I [A] | s [rev] | m [kg] |
| P.KL300.1.024.08.L | KL300 0.8 24VDC for winch drum / sprocket | 90 | 0,8 (0,4) | 72 (48) | 3,0 (2,0) | 0,25 - 100 | 6,2 |
 2 P.KL300.1.024.08.L 11 KL300 0.8 24VDC for winch drum / sprocket 12 13 P.KL300.1.024.08.L.jpg 14 15 CAT_P.KL300.1.024.08.L_2D.gif 10 |
Article number
Description
KL300 0.8 24VDC for winch drum / sprocket
T [Nm]
90
n [rpm]
0,8 (0,4)
P [VA]
72 (48)
I [A]
3,0 (2,0)
s [rev]
0,25 - 100
m [kg]
6,2
Sleeve sprocket
Chain
Tube bolt sprocket
| Article | Description | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.BBKWL10B.Z16.D100 | Tube bolt sprocket 10B z16 - 1" | 420 | 34 | 96 | 150 | 0,8 |
2 P.BBKWL10B.Z16.D100 13 Tube bolt sprocket 10B z16 - 1" 15 16 P.BBKWL10B.Z16.D100.jpg 17 10 CAT_P.BBKWL10B.Z16.D125_2D.gif |
Article number
Description
Tube bolt sprocket 10B z16 - 1"
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
150
m [kg]
0,8
Weld sprocket
| Article | Description | Chain | Shaft | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.LKWL10B.Z16.D100 | Weld sprocket 10B z16 - 1" and 2" | 10B z16 | D100 | 420 | 34 | 96 | 30 | 0,5 |
2 P.LKWL10B.Z16.D100 11 Weld sprocket 10B z16 - 1" and 2" 12 13 P.LKWL10B.Z16.D100.jpg 15 16 CAT_P.LKWL10B.Z16.D100_2D.gif 17 10 |
Article number
Description
Weld sprocket 10B z16 - 1" and 2"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
30
m [kg]
0,5
THG30 gearcase
| Article | Description | T [Nm] | s [mm/rev] | Usage | m [kg] |
| P.THG30.UNIT.U | THG30 Universal | 10,4 | 138,23 | Intens | 0,43 |
Article number
Description
THG30 Universal
T [Nm]
10,4
s [mm/rev]
138,23
Usage
Intens
m [kg]
0,43
THG30 rack
| Article | Description | F [N] | L [mm] | D [mm] | B [mm] | m [kg] |
| P.THG30.3.L797 | THG30 rack 3 mm L=797 mm | 450 | 797 | 25 | 3 | 1,2 |
2 P.THG30.3.L797 11 THG30 rack 3 mm L=797 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L998 | THG30 rack 3 mm L=998 mm | 450 | 998 | 25 | 3 | 1,5 |
2 P.THG30.3.L998 11 THG30 rack 3 mm L=998 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1099 | THG30 rack 3 mm L=1099 mm | 450 | 1099 | 25 | 3 | 1,7 |
2 P.THG30.3.L1099 11 THG30 rack 3 mm L=1099 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1300 | THG30 rack 3 mm L=1300 mm | 450 | 1300 | 25 | 3 | 2,0 |
2 P.THG30.3.L1300 11 THG30 rack 3 mm L=1300 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1400 | THG30 rack 3 mm L=1400 mm | 450 | 1400 | 25 | 3 | 2,2 |
2 P.THG30.3.L1400 11 THG30 rack 3 mm L=1400 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1500 | THG30 rack 3 mm L=1500 mm | 450 | 1500 | 25 | 3 | 2,2 |
2 P.THG30.3.L1500 11 THG30 rack 3 mm L=1500 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif |
Article number
Description
THG30 rack 3 mm L=797 mm
F [N]
450
L [mm]
797
D [mm]
25
B [mm]
3
m [kg]
1,2
Article number
Description
THG30 rack 3 mm L=998 mm
F [N]
450
L [mm]
998
D [mm]
25
B [mm]
3
m [kg]
1,5
Article number
Description
THG30 rack 3 mm L=1099 mm
F [N]
450
L [mm]
1099
D [mm]
25
B [mm]
3
m [kg]
1,7
Article number
Description
THG30 rack 3 mm L=1300 mm
F [N]
450
L [mm]
1300
D [mm]
25
B [mm]
3
m [kg]
2,0
Article number
Description
THG30 rack 3 mm L=1400 mm
F [N]
450
L [mm]
1400
D [mm]
25
B [mm]
3
m [kg]
2,2
Article number
Description
THG30 rack 3 mm L=1500 mm
F [N]
450
L [mm]
1500
D [mm]
25
B [mm]
3
m [kg]
2,2
THG30 window bracket
| Article | Description | m [kg] |
| P.THG30.RB | THG30 aluminium window bracket | 0,06 |
Slide bearing plate
| Article | Description | A [mm] | H [mm] | L [mm] | m [kg] |
| P.GL100.H.L150 | Slide bearing plate 1" H A92 L150 mm | 92 | 125 | 150 | 0,2 |
| P.GL100.H.L158 | Slide bearing plate 1" H A100 L158 mm | 100 | 133 | 158 | 0,2 |
| P.GL100.H.L180 | Slide bearing plate 1" H A122 L180 mm | 122 | 155 | 180 | 0,2 |
Article number
Description
Slide bearing plate 1" H A92 L150 mm
A [mm]
92
H [mm]
125
L [mm]
150
m [kg]
0,2
Article number
Description
Slide bearing plate 1" H A100 L158 mm
A [mm]
100
H [mm]
133
L [mm]
158
m [kg]
0,2
Article number
Description
Slide bearing plate 1" H A122 L180 mm
A [mm]
122
H [mm]
155
L [mm]
180
m [kg]
0,2
Drive systems for ventilation
Crop retention is about much more than simply storage. Ideal air conditions are required at each stage of storage to dry, cool and maintain tubers at temperature. This stops diseases from developing, suppresses germination and maintains quality. Especially for use in storage areas, De Gier offers the perfect drives: in combination with the storage area climate computer, extra precise motion of the drives that control temperature and humidity for a refined and optimal storage climate.
De Gier Drive Systems
+ 31 174 29 20 89