Jump past the navigation
Menu
Menu
Search
Log in
+31 174 29 20 89
Single drinking line on L2 winch motor
Single drinking line on central shaft
Multiple drinking lines on 1 or 5/4 central perpendicular shaft
●
●
HomeDrive SystemsDrive systems for poultry buildingsDrive systems for hoistingDrinking lines

Single drinking line on L2 winch motor

How do I make a calculation?

We are happy to help you with making a calculation

Get in contact with us
Print this system (pdf)

Click here to create a PDF of the page

Download

A GW winchmotor with a double winch drum is mounted against the roof and centrally above the drinking line. The drinking line system is directly connected by the drive (1:1) to the L2 winch drum.

  • Direct control by dedicated winch motor.
  • Powerful self-locking GW motor gearboxes.
  • Wide selection of 1-phase and 3-phase 50/60Hz motors.
  • Complete package of couplings, bearing plates and components.
  • UL/CSA for United States and Canadian market.
  • Precise switching by integrated limit switch.

GW motor gearbox

ArticleDescriptionT (50/60Hz) [Nm]n (50/60Hz) [rpm]L [mm]D [mm]P (50/60Hz) [kW]I (@ Y) (50/60Hz) [A]I (@ Δ) (50/60Hz) [A]m [kg]
P.GW10.3.400.52.LGW10 5.2 3ph 400V for winch drum100 / 805,2 / 6,21911240,18 / 0,220,7 / 0,71,2 / 1,224
P.GW30.400.52.LGW30 5.2 3ph 400V for winch drum300 / 2405,2 / 6,32201450,37 / 0,441,2 / 1,22,1 / 2,130
P.GW40.3.400.52.LGW40 5.2 3ph 400V for winch drum400 / 3205,2 / 6,22201370,55 / 0,661,5 / 1,52,6 / 2,632
P.GW10.3.230.52.LGW10 5.2 1ph 230V for winch drum100 / -5,2 / -1911240,18 / -1,3 / --24
P.GW30.230.52.LGW30 5.2 1ph 230V for winch drum300 / -5,2 / -2201450,55 / -4,5 / --30
P.GW40.3.230.52.LGW40 5.2 1ph 230V for winch drum400 / -5,2 / -2421590,55 / -4,4 / --36
Article number
P.GW10.3.400.52.L
Description
GW10 5.2 3ph 400V for winch drum
T (50/60Hz) [Nm]
100 / 80
n (50/60Hz) [rpm]
5,2 / 6,2
L [mm]
191
D [mm]
124
P (50/60Hz) [kW]
0,18 / 0,22
I (@ Y) (50/60Hz) [A]
0,7 / 0,7
I (@ Δ) (50/60Hz) [A]
1,2 / 1,2
m [kg]
24
Article number
P.GW30.400.52.L
Description
GW30 5.2 3ph 400V for winch drum
T (50/60Hz) [Nm]
300 / 240
n (50/60Hz) [rpm]
5,2 / 6,3
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,37 / 0,44
I (@ Y) (50/60Hz) [A]
1,2 / 1,2
I (@ Δ) (50/60Hz) [A]
2,1 / 2,1
m [kg]
30
Article number
P.GW40.3.400.52.L
Description
GW40 5.2 3ph 400V for winch drum
T (50/60Hz) [Nm]
400 / 320
n (50/60Hz) [rpm]
5,2 / 6,2
L [mm]
220
D [mm]
137
P (50/60Hz) [kW]
0,55 / 0,66
I (@ Y) (50/60Hz) [A]
1,5 / 1,5
I (@ Δ) (50/60Hz) [A]
2,6 / 2,6
m [kg]
32
Article number
P.GW10.3.230.52.L
Description
GW10 5.2 1ph 230V for winch drum
T (50/60Hz) [Nm]
100 / -
n (50/60Hz) [rpm]
5,2 / -
L [mm]
191
D [mm]
124
P (50/60Hz) [kW]
0,18 / -
I (@ Y) (50/60Hz) [A]
1,3 / -
I (@ Δ) (50/60Hz) [A]
-
m [kg]
24
Article number
P.GW30.230.52.L
Description
GW30 5.2 1ph 230V for winch drum
T (50/60Hz) [Nm]
300 / -
n (50/60Hz) [rpm]
5,2 / -
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,55 / -
I (@ Y) (50/60Hz) [A]
4,5 / -
I (@ Δ) (50/60Hz) [A]
-
m [kg]
30
Article number
P.GW40.3.230.52.L
Description
GW40 5.2 1ph 230V for winch drum
T (50/60Hz) [Nm]
400 / -
n (50/60Hz) [rpm]
5,2 / -
L [mm]
242
D [mm]
159
P (50/60Hz) [kW]
0,55 / -
I (@ Y) (50/60Hz) [A]
4,4 / -
I (@ Δ) (50/60Hz) [A]
-
m [kg]
36

Mounting plate

ArticleDescriptionA [mm]H [mm]m [kg]
P.MP.GW.H.A100Mounting plate GW right angle A100 H1111001112,0
P.MP.GW.H.A122Mounting plate GW right angle A122 H1331221332,2
Article number
P.MP.GW.H.A100
Description
Mounting plate GW right angle A100 H111
A [mm]
100
H [mm]
111
m [kg]
2,0
Article number
P.MP.GW.H.A122
Description
Mounting plate GW right angle A122 H133
A [mm]
122
H [mm]
133
m [kg]
2,2

Tube bolt sprocket

ArticleDescriptionL [mm]B [mm]D1 [mm]D2 [mm]D3 [mm]m [kg]
P.LT2.GW10Double cable winch drum GW10 D50 D120902850181182,8
P.LT2.GWDouble cable winch drum GW20/30/40902850281482,8
Article number
P.LT2.GW10
Description
Double cable winch drum GW10 D50 D120
L [mm]
90
B [mm]
28
D1 [mm]
50
D2 [mm]
18
D3 [mm]
118
m [kg]
2,8
Article number
P.LT2.GW
Description
Double cable winch drum GW20/30/40
L [mm]
90
B [mm]
28
D1 [mm]
50
D2 [mm]
28
D3 [mm]
148
m [kg]
2,8

Drive systems for hoisting

The welfare of poultry is not only in the right climate, but also in feed and water at the right height for optimale feed consumption. To overcome height differences, drinking and feeding lines, adjustable platforms and suspended heaters must be lifted. This requires the necessary precision that it will positioned on the right height, not too high or not too low. For this we supply a complete range of winch drives that have been specially developed for this purpose. Equipped with special winch drums, we offer powerful, high precision hoisting systems.

Drinking lines
Drinking lines
Feed lines
Feed lines
●
●
HomeDrive SystemsDrive systems for poultry buildingsDrive systems for hoistingDrinking lines

Single drinking line on central shaft

How do I make a calculation?

We are happy to help you with making a calculation

Get in contact with us
Print this system (pdf)

Click here to create a PDF of the page

Download

The GW motor gearbox is equipped with a chain coupling on both sides. The motor gearbox - with a coupled shaft on both sides - is mounted longitudinally on the roof and suspended with glide bearings. Cords connected to the drinking line are wrapped on the drive shaft. Hoisting of the drinking line is done by rotating the shaft.

  • Efficient solution for light to medium systems.
  • Insensitive to wire or cable breakage.
  • Wide selection of 1-phase and 3-phase 50/60Hz motors.
  • Complete package of couplings, bearing plates and components.
  • UL/CSA for United States and Canadian market.
  • Precise switching by integrated limit switch.

GW motor gearbox

ArticleArticle nameT [Nm]n (400V 50Hz) [rpm]n (480V 60Hz) [rpm]P [kW]I [A]Shaft/ChainL [mm]m [kg]
P.GW10.3.230.52.KWGW10 5.2 1ph 230V with CW+CH 10B z16100 / -5,2 / -1911240,18 / -1,3 / --24
P.GW10.3.400.52.KWGW10 5.2 3ph 400V with CW+CH 10B z16100 / 805,2 / 6,21911240,18 / 0,220,7 / 0,71,2 / 1,224
P.GW30.2.230.52.KWGW30 5.2 1ph 230V with CW+CH 10B z16300 / -5,2 / -2201450,55 / -4,5 / --27
P.GW30.400.52.KWGW30 5.2 3ph 400V with CW+CH 10B z16300 / 2405,2 / 6,22201450,37 / 0,441,2 / 1,22,1 / 2,127
P.GW40.3.230.52.KWGW40 5.2 1ph 230V with CW+CH 10B z16400 / -5,2 / -2421590,55 / -4,4 / --29
P.GW40.3.400.52.KWGW40 5.2 3ph 400V with CW+CH 10B z16400 / 3205,2 / 6,22201370,55 / 0,661,5 / 1,52,6 / 2,629
Article number
P.GW10.3.230.52.KW
Article name
GW10 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
100 / -
n (400V 50Hz) [rpm]
5,2 / -
n (480V 60Hz) [rpm]
191
P [kW]
124
I [A]
0,18 / -
Shaft/Chain
1,3 / -
L [mm]
-
m [kg]
24
Article number
P.GW10.3.400.52.KW
Article name
GW10 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
100 / 80
n (400V 50Hz) [rpm]
5,2 / 6,2
n (480V 60Hz) [rpm]
191
P [kW]
124
I [A]
0,18 / 0,22
Shaft/Chain
0,7 / 0,7
L [mm]
1,2 / 1,2
m [kg]
24
Article number
P.GW30.2.230.52.KW
Article name
GW30 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
300 / -
n (400V 50Hz) [rpm]
5,2 / -
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,55 / -
Shaft/Chain
4,5 / -
L [mm]
-
m [kg]
27
Article number
P.GW30.400.52.KW
Article name
GW30 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
300 / 240
n (400V 50Hz) [rpm]
5,2 / 6,2
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,37 / 0,44
Shaft/Chain
1,2 / 1,2
L [mm]
2,1 / 2,1
m [kg]
27
Article number
P.GW40.3.230.52.KW
Article name
GW40 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
400 / -
n (400V 50Hz) [rpm]
5,2 / -
n (480V 60Hz) [rpm]
242
P [kW]
159
I [A]
0,55 / -
Shaft/Chain
4,4 / -
L [mm]
-
m [kg]
29
Article number
P.GW40.3.400.52.KW
Article name
GW40 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
400 / 320
n (400V 50Hz) [rpm]
5,2 / 6,2
n (480V 60Hz) [rpm]
220
P [kW]
137
I [A]
0,55 / 0,66
Shaft/Chain
1,5 / 1,5
L [mm]
2,6 / 2,6
m [kg]
29

Mounting plate

ArticleArticle nameA [mm]H [mm]m [kg]
P.MP.GW.H.A100Mounting plate GW right angle A100 H1111001112,0
P.MP.GW.H.A122Mounting plate GW right angle A122 H1331221332,2
Article number
P.MP.GW.H.A100
Article name
Mounting plate GW right angle A100 H111
A [mm]
100
H [mm]
111
m [kg]
2,0
Article number
P.MP.GW.H.A122
Article name
Mounting plate GW right angle A122 H133
A [mm]
122
H [mm]
133
m [kg]
2,2

Tube bolt sprocket

ArticleDescriptionChainShaftTmax [Nm]Db [mm]D [mm]L [mm]m [kg]
P.BBKWL10B.Z16.D100Tube bolt sprocket 10B z16 - 1"10B z16D10042034961500,8
P.BBKWL10B.Z16.D125Tube bolt sprocket 10B z16 - 5/4"10B z16D12542043961450,7
Article number
P.BBKWL10B.Z16.D100
Description
Tube bolt sprocket 10B z16 - 1"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
150
m [kg]
0,8
Article number
P.BBKWL10B.Z16.D125
Description
Tube bolt sprocket 10B z16 - 5/4"
Chain
10B z16
Shaft
D125
Tmax [Nm]
420
Db [mm]
43
D [mm]
96
L [mm]
145
m [kg]
0,7

Weld sprocket

ArticleDescriptionChainShaftTmax [Nm]Db [mm]D [mm]L [mm]m [kg]
P.LKWL10B.Z16.D100Weld sprocket 10B z16 - 1" and 2"10B z16D1004203496300,5
P.LKWL10B.Z16.D125Weld sprocket 10B z16 - 5/4"10B z16D1254204396300,4
Article number
P.LKWL10B.Z16.D100
Description
Weld sprocket 10B z16 - 1" and 2"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
30
m [kg]
0,5
Article number
P.LKWL10B.Z16.D125
Description
Weld sprocket 10B z16 - 5/4"
Chain
10B z16
Shaft
D125
Tmax [Nm]
420
Db [mm]
43
D [mm]
96
L [mm]
30
m [kg]
0,4

Slide bearing plate

ArticleDescriptionA [mm]H [mm]L [mm]m [kg]
P.GL100.H.L158Slide bearing plate 1" H A100 L158 mm1001331580,2
P.GL100.H.L180Slide bearing plate 1" H A122 L180 mm1221551800,2
P.GL125.H.L186Slide bearing plate 5/4" H A122 L186 mm1221621860,3
Article number
P.GL100.H.L158
Description
Slide bearing plate 1" H A100 L158 mm
A [mm]
100
H [mm]
133
L [mm]
158
m [kg]
0,2
Article number
P.GL100.H.L180
Description
Slide bearing plate 1" H A122 L180 mm
A [mm]
122
H [mm]
155
L [mm]
180
m [kg]
0,2
Article number
P.GL125.H.L186
Description
Slide bearing plate 5/4" H A122 L186 mm
A [mm]
122
H [mm]
162
L [mm]
186
m [kg]
0,3

Cable ring

ArticleArticle namem [kg]
P.KABELRINGCable clamp 1" d36 D50 4xØ4,50,09
P.KABELRING.D125Cable clamp 1-1/4" d44 D60 4xØ4,50,11
Article number
P.KABELRING
Article name
Cable clamp 1" d36 D50 4xØ4,5
m [kg]
0,09
Article number
P.KABELRING.D125
Article name
Cable clamp 1-1/4" d44 D60 4xØ4,5
m [kg]
0,11

Drive systems for hoisting

The welfare of poultry is not only in the right climate, but also in feed and water at the right height for optimale feed consumption. To overcome height differences, drinking and feeding lines, adjustable platforms and suspended heaters must be lifted. This requires the necessary precision that it will positioned on the right height, not too high or not too low. For this we supply a complete range of winch drives that have been specially developed for this purpose. Equipped with special winch drums, we offer powerful, high precision hoisting systems.

Drinking lines
Drinking lines
Feed lines
Feed lines
●
●
HomeDrive SystemsDrive systems for poultry buildingsDrive systems for hoistingDrinking lines

Multiple drinking lines on 1 or 5/4 central perpendicular shaft

How do I make a calculation?

We are happy to help you with making a calculation

Get in contact with us
Print this system (pdf)

Click here to create a PDF of the page

Download

GW motor gearbox is provided with a chain coupling on both sides. The geared motor - with a coupled shaft on both sides, is in the width of the roof, by means of a universal joint and suspended with slide bearings. Cords are wound on the drive shaft, which are connected to the drinking line. Winching of the drinking line takes place by rotation of the shaft.

  • Efficient solution for lighter systems.
  • One motor gearbox for multiple drinking lines.
  • Wide selection of 1-phase and 3-phase 50/60Hz motors.
  • Complete package of couplings, bearing plates and components.
  • UL/CSA for United States and Canadian market.
  • Precise switching by integrated limit switch (limit and emergency switching).

GW motor gearbox

ArticleArticle nameT [Nm]n (480V 60Hz) [rpm]P [kW]I [A]L [mm]Shaft/Chainm [kg]
P.GW10.3.230.26.KWGW10 2.6 1ph 230V with CW+CH 10B z16100 / -1681240,09 / --0,9 / -21
P.GW10.3.230.52.KWGW10 5.2 1ph 230V with CW+CH 10B z16100 / -1911240,18 / --1,3 / -24
P.GW10.3.400.26.KWGW10 2.6 3ph 400V with CW+CH 10B z16100 / 801681240,09 / 0,110,7 / 0,70,4 / 0,421
P.GW10.3.400.52.KWGW10 5.2 3ph 400V with CW+CH 10B z16100 / 801911240,18 / 0,221,2 / 1,20,7 / 0,724
P.GW30.2.230.26.KWGW30 2.6 1ph 230V with CW+CH 10B z16300 / -2201450,12 / --1,3 / -21
P.GW30.2.230.52.KWGW30 5.2 1ph 230V with CW+CH 10B z16300 / -2201450,55 / --4,5 / -27
P.GW30.400.26.KWGW30 2.6 3ph 400V with CW+CH 10B z16300 / 2402201450,25 / 0,301,4 / 1,40,8 / 0,824
P.GW30.400.52.KWGW30 5.2 3ph 400V with CW+CH 10B z16300 / 2402201450,37 / 0,442,1 / 2,11,2 / 1,227
P.GW40.2.230.26.KWGW40 2.6 1ph 230V with CW+CH 10B z16400 / -2201370,25 / --3,2 / -29
P.GW40.3.230.52.KWGW40 5.2 1ph 230V with CW+CH 10B z16400 / -2421590,55 / --4,4 / -29
P.GW40.400.26.KWGW40 2.6 3ph 400V with CW+CH 10B z16400 / 3202201590,37 / 0,441,7 / 1,71,0 / 1,029
P.GW40.3.400.52.KWGW40 5.2 3ph 400V with CW+CH 10B z16400 / 3202201370,55 / 0,662,6 / 2,61,5 / 1,529
Article number
P.GW10.3.230.26.KW
Article name
GW10 2.6 1ph 230V with CW+CH 10B z16
T [Nm]
100 / -
n (480V 60Hz) [rpm]
168
P [kW]
124
I [A]
0,09 / -
L [mm]
-
Shaft/Chain
0,9 / -
m [kg]
21
Article number
P.GW10.3.230.52.KW
Article name
GW10 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
100 / -
n (480V 60Hz) [rpm]
191
P [kW]
124
I [A]
0,18 / -
L [mm]
-
Shaft/Chain
1,3 / -
m [kg]
24
Article number
P.GW10.3.400.26.KW
Article name
GW10 2.6 3ph 400V with CW+CH 10B z16
T [Nm]
100 / 80
n (480V 60Hz) [rpm]
168
P [kW]
124
I [A]
0,09 / 0,11
L [mm]
0,7 / 0,7
Shaft/Chain
0,4 / 0,4
m [kg]
21
Article number
P.GW10.3.400.52.KW
Article name
GW10 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
100 / 80
n (480V 60Hz) [rpm]
191
P [kW]
124
I [A]
0,18 / 0,22
L [mm]
1,2 / 1,2
Shaft/Chain
0,7 / 0,7
m [kg]
24
Article number
P.GW30.2.230.26.KW
Article name
GW30 2.6 1ph 230V with CW+CH 10B z16
T [Nm]
300 / -
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,12 / -
L [mm]
-
Shaft/Chain
1,3 / -
m [kg]
21
Article number
P.GW30.2.230.52.KW
Article name
GW30 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
300 / -
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,55 / -
L [mm]
-
Shaft/Chain
4,5 / -
m [kg]
27
Article number
P.GW30.400.26.KW
Article name
GW30 2.6 3ph 400V with CW+CH 10B z16
T [Nm]
300 / 240
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,25 / 0,30
L [mm]
1,4 / 1,4
Shaft/Chain
0,8 / 0,8
m [kg]
24
Article number
P.GW30.400.52.KW
Article name
GW30 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
300 / 240
n (480V 60Hz) [rpm]
220
P [kW]
145
I [A]
0,37 / 0,44
L [mm]
2,1 / 2,1
Shaft/Chain
1,2 / 1,2
m [kg]
27
Article number
P.GW40.2.230.26.KW
Article name
GW40 2.6 1ph 230V with CW+CH 10B z16
T [Nm]
400 / -
n (480V 60Hz) [rpm]
220
P [kW]
137
I [A]
0,25 / -
L [mm]
-
Shaft/Chain
3,2 / -
m [kg]
29
Article number
P.GW40.3.230.52.KW
Article name
GW40 5.2 1ph 230V with CW+CH 10B z16
T [Nm]
400 / -
n (480V 60Hz) [rpm]
242
P [kW]
159
I [A]
0,55 / -
L [mm]
-
Shaft/Chain
4,4 / -
m [kg]
29
Article number
P.GW40.400.26.KW
Article name
GW40 2.6 3ph 400V with CW+CH 10B z16
T [Nm]
400 / 320
n (480V 60Hz) [rpm]
220
P [kW]
159
I [A]
0,37 / 0,44
L [mm]
1,7 / 1,7
Shaft/Chain
1,0 / 1,0
m [kg]
29
Article number
P.GW40.3.400.52.KW
Article name
GW40 5.2 3ph 400V with CW+CH 10B z16
T [Nm]
400 / 320
n (480V 60Hz) [rpm]
220
P [kW]
137
I [A]
0,55 / 0,66
L [mm]
2,6 / 2,6
Shaft/Chain
1,5 / 1,5
m [kg]
29

Mounting plate

ArticleArticle nameA [mm]H [mm]m [kg]
P.MP.GW.H.A100Mounting plate GW right angle A100 H1111001112,0
P.MP.GW.H.A122Mounting plate GW right angle A122 H1331221332,2
Article number
P.MP.GW.H.A100
Article name
Mounting plate GW right angle A100 H111
A [mm]
100
H [mm]
111
m [kg]
2,0
Article number
P.MP.GW.H.A122
Article name
Mounting plate GW right angle A122 H133
A [mm]
122
H [mm]
133
m [kg]
2,2

Tube bolt universal joints D25

ArticleDescriptionTmax [Nm]Db [mm]m [kg]
P.BBKRKZ.D100.D25Tube-Bolt Universal joint 1" 300Nm GW300251,7
P.BBKRKZ.D125.D25.02Tube-Bolt Universal joint spec 5/4"-D25 550Nm550431,7
Article number
P.BBKRKZ.D100.D25
Description
Tube-Bolt Universal joint 1" 300Nm GW
Tmax [Nm]
300
Db [mm]
25
m [kg]
1,7
Article number
P.BBKRKZ.D125.D25.02
Description
Tube-Bolt Universal joint spec 5/4"-D25 550Nm
Tmax [Nm]
550
Db [mm]
43
m [kg]
1,7

Tube bolt sprocket

ArticleDescriptionChainShaftTmax [Nm]Db [mm]D [mm]L [mm]m [kg]
P.BBKWL10B.Z16.D100Tube bolt sprocket 10B z16 - 1"10B z16D10042034961500,8
P.BBKWL10B.Z16.D125Tube bolt sprocket 10B z16 - 5/4"10B z16D12542043961450,7
Article number
P.BBKWL10B.Z16.D100
Description
Tube bolt sprocket 10B z16 - 1"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
150
m [kg]
0,8
Article number
P.BBKWL10B.Z16.D125
Description
Tube bolt sprocket 10B z16 - 5/4"
Chain
10B z16
Shaft
D125
Tmax [Nm]
420
Db [mm]
43
D [mm]
96
L [mm]
145
m [kg]
0,7

Weld sprocket

ArticleDescriptionChainShaftTmax [Nm]Db [mm]D [mm]L [mm]m [kg]
P.LKWL10B.Z16.D100Weld sprocket 10B z16 - 1" and 2"10B z16D1004203496300,5
P.LKWL10B.Z16.D125Weld sprocket 10B z16 - 5/4"10B z16D1254204396300,4
Article number
P.LKWL10B.Z16.D100
Description
Weld sprocket 10B z16 - 1" and 2"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
30
m [kg]
0,5
Article number
P.LKWL10B.Z16.D125
Description
Weld sprocket 10B z16 - 5/4"
Chain
10B z16
Shaft
D125
Tmax [Nm]
420
Db [mm]
43
D [mm]
96
L [mm]
30
m [kg]
0,4

Slide bearing plate

ArticleDescriptionA [mm]H [mm]L [mm]m [kg]
P.GL100.H.L155Slide bearing plate 1" H A97 L155 mm971301550,2
P.GL100.H.L180Slide bearing plate 1" H A122 L180 mm1221551800,2
P.GL125.H.L186Slide bearing plate 5/4" H A122 L186 mm1221621860,3
Article number
P.GL100.H.L155
Description
Slide bearing plate 1" H A97 L155 mm
A [mm]
97
H [mm]
130
L [mm]
155
m [kg]
0,2
Article number
P.GL100.H.L180
Description
Slide bearing plate 1" H A122 L180 mm
A [mm]
122
H [mm]
155
L [mm]
180
m [kg]
0,2
Article number
P.GL125.H.L186
Description
Slide bearing plate 5/4" H A122 L186 mm
A [mm]
122
H [mm]
162
L [mm]
186
m [kg]
0,3

Cable ring

ArticleArticle namem [kg]
P.KABELRINGCable clamp 1" d36 D50 4xØ4,50,09
P.KABELRING.D125Cable clamp 1-1/4" d44 D60 4xØ4,50,11
Article number
P.KABELRING
Article name
Cable clamp 1" d36 D50 4xØ4,5
m [kg]
0,09
Article number
P.KABELRING.D125
Article name
Cable clamp 1-1/4" d44 D60 4xØ4,5
m [kg]
0,11

Drive systems for hoisting

The welfare of poultry is not only in the right climate, but also in feed and water at the right height for optimale feed consumption. To overcome height differences, drinking and feeding lines, adjustable platforms and suspended heaters must be lifted. This requires the necessary precision that it will positioned on the right height, not too high or not too low. For this we supply a complete range of winch drives that have been specially developed for this purpose. Equipped with special winch drums, we offer powerful, high precision hoisting systems.

Drinking lines
Drinking lines
Feed lines
Feed lines

De Gier Drive Systems
+ 31 174 29 20 89

Markets
HorticultureIntensive LivestockCrop StorageNon-residential buildings
Drivesystems
Glass greenhousesPoly greenhousesWide-span greenhousesNon-residential buildingsPoultryPig buildingsCow buildingsCrop storage
Products
CatalogueBrochuresDocuments
More
NewsEventsSupportJobsAbout us
Contact
De Gier Drive Systems

Westlandseweg 9
2291 PG Wateringen
Netherlands
+31 174 29 20 89
sales@degierdrivesystems.com

We use cookies just to track visits to our website, we store no personal details. We also us commercial cookies, accept them for a better user experience. Please refer to our Privacy Policy.