Sliding sprockets

Description

The sleeve sprocket is intended to be slid onto the input shaft of a gearcase. It must be combined with a matching duplex chain and a sprocket that is connected to the drive shaft. The sleeve sprocket must be able to move freely on the input shaft of the gearcase.

Ideal connection to gearbox which allows expansion and contraction of pipe.
Allows small alignment differences to be accommodated.
Robust galvanised version.

Performances

Article	Description	Chain	Shaft	Tmax [Nm]	L [mm]	m [kg]
P.KWL08B.Z16.S20	Sleeve sprocket 08B z16 - S20	08B z16	S20	240	28	0,4
2 P.KWL08B.Z16.S20 11 Sleeve sprocket 08B z16 - S20 12 13 P.KWL10B.Z16.S20.jpg 15 10 CAT_P.KWL10B.Z16.S20_2D.gif more info »
P.KWL10B.Z16.S20	Sleeve sprocket 10B z16 p5/8" s20	10B z16	S20	240	27	0,4
2 P.KWL10B.Z16.S20 11 Sleeve sprocket 10B z16 p5/8" s20 12 13 P.KWL10B.Z16.S20.jpg 15 10 CAT_P.KWL10B.Z16.S20_2D.gif more info »
P.KWL10B.Z16.ZK	Sleeve sprocket 10B z16 - ZK	10B z16	ZK	420	30	0,6
2 P.KWL10B.Z16.ZK 11 Sleeve sprocket 10B z16 - ZK 12 13 P.KWL10B.Z16.ZK.jpg 15 10 CAT_P.KWL10B.Z16.ZK_2D.gif more info »

Related Products

Tube bolt chain wheels

Chain coupling 08B for motor gearbox or worm gearbox

Weld sprockets

Chains

Tube bolt chain coupling 08B

General Information

The use of a chain coupling on a motor gearbox or gearcase to connect a drive tube makes it possible to cope with minor alignment differences. A complete chain coupling set consists of two sprockets connected by a duplex chain. The chain couplings are available in 5 different versions with the following features:

08B Z12: 12 teeth 1/2” x 5/16”, maximum torque 120 Nm
08B Z16: 16 teeth 1/2” x 5/16”, maximum torque 240 Nm
10B Z16: 16 teeth 5/8” x 3/8”, maximum torque 420 Nm
12B Z16: 16 teeth 3/4” x 7/16”, maximum torque 675 Nm
12B Z18: 186 teeth 3/4” x 7/16”, maximum torque 760 Nm