Direct continuous ridge ventilation
Direct continuous ridge ventilation
We are happy to help you with making a calculation
Get in contact with usContinuous ridge ventilation is a natural form of ventilation. This involves windows hinging in the ridge along the entire length of the wide-span greenhouse. A drive tube with rack and pinion units that opens or closes the window runs parallel to the ridge. The drive tube is driven by a self-locking electrically or manually driven gearbox.
- Always a suitable motor gearbox.
- Various matching gear racks and options available.
- Limited mechanical installation.
- Gear racks protected against run-out and blow-out.
- Easy installation and maintenance.
- Very reliable.
GW motor gearbox
| Article | Description | T (50/60Hz) [Nm] | n (50/60Hz) [rpm] | L [mm] | D [mm] | P (50/60Hz) [kW] | I (@ Y) (50/60Hz) [A] | I (@ Δ) (50/60Hz) [A] | m [kg] |
| P.GW10.3.400.13.KW | GW10 1.3 3ph 400V with CW+CH 10B z16 | 100 / 80 | 1,3 / 1,6 | 191 | 124 | 0,09 / 0,11 | 0,5 / 0,5 | 0,9 / 0,9 | 21 |
 2 P.GW10.3.400.13.KW 11 GW10 1.3 3ph 400V with CW+CH 10B z16 12 13 P.GW10.400.26.KW.jpg 14 15 CAT_P.GW10.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW10.3.400.26.KW | GW10 2.6 3ph 400V with CW+CH 10B z16 | 100 / 80 | 2,6 / 3,1 | 168 | 124 | 0,09 / 0,11 | 0,4 / 0,4 | 0,7 / 0,7 | 21 |
2 P.GW10.3.400.26.KW 11 GW10 2.6 3ph 400V with CW+CH 10B z16 12 13 P.GW10.400.26.KW.jpg 14 15 CAT_P.GW10.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW10.3.400.52.KW | GW10 5.2 3ph 400V with CW+CH 10B z16 | 100 / 80 | 5,2 / 6,2 | 191 | 124 | 0,18 / 0,22 | 0,7 / 0,7 | 1,2 / 1,2 | 24 |
2 P.GW10.3.400.52.KW 11 GW10 5.2 3ph 400V with CW+CH 10B z16 12 13 P.GW10.400.26.KW.jpg 14 15 CAT_P.GW10.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW30.400.13.KW | GW30 1.3 3ph 400V with CW+CH 10B z16 | 300 / 240 | 1,3 / 1,6 | 191 | 145 | 0,18 / 0,22 | 0,7 / 0,7 | 1,2 / 1,2 | 22 |
 2 P.GW30.400.13.KW 11 GW30 1.3 3ph 400V with CW+CH 10B z16 12 13 P.GW30.400.26.KW.jpg 14 15 CAT_P.GW30.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW30.400.26.KW | GW30 2.6 3ph 400V with CW+CH 10B z16 | 300 / 240 | 2,6 / 3,1 | 220 | 145 | 0,25 / 0,30 | 0,8 / 0,8 | 1,4 / 1,4 | 24 |
2 P.GW30.400.26.KW 11 GW30 2.6 3ph 400V with CW+CH 10B z16 12 13 P.GW30.400.26.KW.jpg 14 15 CAT_P.GW30.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW30.400.52.KW | GW30 5.2 3ph 400V with CW+CH 10B z16 | 300 / 240 | 5,2 / 6,2 | 220 | 145 | 0,37 / 0,44 | 1,2 / 1,2 | 2,1 / 2,1 | 27 |
2 P.GW30.400.52.KW 11 GW30 5.2 3ph 400V with CW+CH 10B z16 12 13 P.GW30.400.26.KW.jpg 14 15 CAT_P.GW30.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW40.400.13.KW | GW40 1.3 3ph 400V with CW+CH 10B z16 | 400 / 320 | 1,3 / 1,6 | 220 | 159 | 0,25 / 0,30 | 0,8 / 0,8 | 1,4 / 1,4 | 27 |
 2 P.GW40.400.13.KW 11 GW40 1.3 3ph 400V with CW+CH 10B z16 12 13 P.GW80.400.26.KW.jpg 14 15 CAT_P.GW80.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW40.400.26.KW | GW40 2.6 3ph 400V with CW+CH 10B z16 | 400 / 320 | 2,6 / 3,1 | 220 | 159 | 0,37 / 0,44 | 1,0 / 1,0 | 1,7 / 1,7 | 29 |
2 P.GW40.400.26.KW 11 GW40 2.6 3ph 400V with CW+CH 10B z16 12 13 P.GW80.400.26.KW.jpg 14 15 CAT_P.GW80.400.26.KW_2D.gif 17 16 10 | |||||||||
| P.GW40.3.400.52.KW | GW40 5.2 3ph 400V with CW+CH 10B z16 | 400 / 320 | 5,2 / 6,2 | 220 | 137 | 0,55 / 0,66 | 1,5 / 1,5 | 2,6 / 2,6 | 29 |
2 P.GW40.3.400.52.KW 11 GW40 5.2 3ph 400V with CW+CH 10B z16 12 13 P.GW80.400.26.KW.jpg 14 15 CAT_P.GW80.400.26.KW_2D.gif 17 16 10 |
Article number
Description
GW10 1.3 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
100 / 80
n (50/60Hz) [rpm]
1,3 / 1,6
L [mm]
191
D [mm]
124
P (50/60Hz) [kW]
0,09 / 0,11
I (@ Y) (50/60Hz) [A]
0,5 / 0,5
I (@ Δ) (50/60Hz) [A]
0,9 / 0,9
m [kg]
21
Article number
Description
GW10 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
100 / 80
n (50/60Hz) [rpm]
2,6 / 3,1
L [mm]
168
D [mm]
124
P (50/60Hz) [kW]
0,09 / 0,11
I (@ Y) (50/60Hz) [A]
0,4 / 0,4
I (@ Δ) (50/60Hz) [A]
0,7 / 0,7
m [kg]
21
Article number
Description
GW10 5.2 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
100 / 80
n (50/60Hz) [rpm]
5,2 / 6,2
L [mm]
191
D [mm]
124
P (50/60Hz) [kW]
0,18 / 0,22
I (@ Y) (50/60Hz) [A]
0,7 / 0,7
I (@ Δ) (50/60Hz) [A]
1,2 / 1,2
m [kg]
24
Article number
Description
GW30 1.3 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
300 / 240
n (50/60Hz) [rpm]
1,3 / 1,6
L [mm]
191
D [mm]
145
P (50/60Hz) [kW]
0,18 / 0,22
I (@ Y) (50/60Hz) [A]
0,7 / 0,7
I (@ Δ) (50/60Hz) [A]
1,2 / 1,2
m [kg]
22
Article number
Description
GW30 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
300 / 240
n (50/60Hz) [rpm]
2,6 / 3,1
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,25 / 0,30
I (@ Y) (50/60Hz) [A]
0,8 / 0,8
I (@ Δ) (50/60Hz) [A]
1,4 / 1,4
m [kg]
24
Article number
Description
GW30 5.2 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
300 / 240
n (50/60Hz) [rpm]
5,2 / 6,2
L [mm]
220
D [mm]
145
P (50/60Hz) [kW]
0,37 / 0,44
I (@ Y) (50/60Hz) [A]
1,2 / 1,2
I (@ Δ) (50/60Hz) [A]
2,1 / 2,1
m [kg]
27
Article number
Description
GW40 1.3 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
400 / 320
n (50/60Hz) [rpm]
1,3 / 1,6
L [mm]
220
D [mm]
159
P (50/60Hz) [kW]
0,25 / 0,30
I (@ Y) (50/60Hz) [A]
0,8 / 0,8
I (@ Δ) (50/60Hz) [A]
1,4 / 1,4
m [kg]
27
Article number
Description
GW40 2.6 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
400 / 320
n (50/60Hz) [rpm]
2,6 / 3,1
L [mm]
220
D [mm]
159
P (50/60Hz) [kW]
0,37 / 0,44
I (@ Y) (50/60Hz) [A]
1,0 / 1,0
I (@ Δ) (50/60Hz) [A]
1,7 / 1,7
m [kg]
29
Article number
Description
GW40 5.2 3ph 400V with CW+CH 10B z16
T (50/60Hz) [Nm]
400 / 320
n (50/60Hz) [rpm]
5,2 / 6,2
L [mm]
220
D [mm]
137
P (50/60Hz) [kW]
0,55 / 0,66
I (@ Y) (50/60Hz) [A]
1,5 / 1,5
I (@ Δ) (50/60Hz) [A]
2,6 / 2,6
m [kg]
29
Weld sprockets
| Article | Description | Chain | Shaft | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.LKWL10B.Z16.D100 | Weld sprocket 10B z16 - 1" and 2" | 10B z16 | D100 | 420 | 34 | 96 | 30 | 0,5 |
 2 P.LKWL10B.Z16.D100 11 Weld sprocket 10B z16 - 1" and 2" 12 13 P.LKWL10B.Z16.D100.jpg 15 16 CAT_P.LKWL10B.Z16.D100_2D.gif 17 10 |
Article number
Description
Weld sprocket 10B z16 - 1" and 2"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
30
m [kg]
0,5
Tube bolt sprocket
| Article | Description | Chain | Shaft | Tmax [Nm] | Db [mm] | D [mm] | L [mm] | m [kg] |
| P.BBKWL10B.Z16.D100 | Tube bolt sprocket 10B z16 - 1" | 10B z16 | D100 | 420 | 34 | 96 | 150 | 0,8 |
 2 P.BBKWL10B.Z16.D100 11 Tube bolt sprocket 10B z16 - 1" 12 13 P.BBKWL10B.Z16.D100.jpg 15 16 CAT_P.BBKWL10B.Z16.D125_2D.gif 17 10 |
Article number
Description
Tube bolt sprocket 10B z16 - 1"
Chain
10B z16
Shaft
D100
Tmax [Nm]
420
Db [mm]
34
D [mm]
96
L [mm]
150
m [kg]
0,8
Mounting plate straight
| Article | Description | A [mm] | L [mm] | m [kg] |
| P.MP.GW.R.A163 | Mounting plate GW straight A163 L174 | 163 | 174 | 1,2 |
Article number
Description
Mounting plate GW straight A163 L174
A [mm]
163
L [mm]
174
m [kg]
1,2
Multiple options available upon request
Mounting plate angled
| Article | Description | L [mm] | A [mm] | D [mm] | B [mm] | C [°] | m [kg] |
| P.MP.GW.S.A98.02 | Mounting plate GW slanting A98 L154 2x Ø11 | 171 | 98 | 11 | 20 | 23 | 0,9 |
 2 P.MP.GW.S.A98.02 11 Mounting plate GW slanting A98 L154 2x Ø11 12 13 P.MP.GW.S.A000.xx.jpg 14 15 CAT_P.MP.GW.S.A000.xx_2D.gif 10 |
Article number
Description
Mounting plate GW slanting A98 L154 2x Ø11
L [mm]
171
A [mm]
98
D [mm]
11
B [mm]
20
C [°]
23
m [kg]
0,9
Multiple options available upon request
Rack box
| Article | Description | T [Nm] | s [mm/rev] | Usage | m [kg] |
| P.THG30.UNIT.U | THG30 Universal | 10,4 | 138,23 | Intens | 0,43 |
Article number
Description
THG30 Universal
T [Nm]
10,4
s [mm/rev]
138,23
Usage
Intens
m [kg]
0,43
Multiple options available upon request
THG30 racks
| Article | Description | F [N] | L [mm] | B [mm] | D [mm] | m [kg] |
| P.THG30.3.L1250 | THG30 rack 3 mm L=1250 mm | 450 | 1250 | 25 | 3 | 1,9 |
 2 P.THG30.3.L1250 11 THG30 rack 3 mm L=1250 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1350 | THG30 Heugel 3 mm L=1350 mm | 450 | 1350 | 25 | 3 | 2,1 |
2 P.THG30.3.L1350 11 THG30 Heugel 3 mm L=1350 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1451 | THG30 rack 3 mm L=1451 mm | 450 | 1451 | 25 | 3 | 2,2 |
2 P.THG30.3.L1451 11 THG30 rack 3 mm L=1451 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1551 | THG30 rack 3 mm L=1551 mm | 450 | 1551 | 25 | 3 | 2,4 |
2 P.THG30.3.L1551 11 THG30 rack 3 mm L=1551 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1652 | THG30 rack 3 mm L=1652 mm | 450 | 1652 | 25 | 3 | 2,5 |
2 P.THG30.3.L1652 11 THG30 rack 3 mm L=1652 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1752 | THG30 rack 3 mm L=1752 mm | 450 | 1752 | 25 | 3 | 2,7 |
2 P.THG30.3.L1752 11 THG30 rack 3 mm L=1752 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1852 | THG30 rack 3 mm L=1852 mm | 450 | 1852 | 25 | 3 | 2,8 |
2 P.THG30.3.L1852 11 THG30 rack 3 mm L=1852 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif | ||||||
| P.THG30.3.L1953 | THG30 rack 3 mm L=1953 mm | 450 | 1953 | 25 | 3 | 3,0 |
2 P.THG30.3.L1953 11 THG30 rack 3 mm L=1953 mm 12 13 RAW_P.THG30.0.L0000.jpg 14 10 CAT_P.THG30.3.L0000_2D.gif |
Article number
Description
THG30 rack 3 mm L=1250 mm
F [N]
450
L [mm]
1250
B [mm]
25
D [mm]
3
m [kg]
1,9
Article number
Description
THG30 Heugel 3 mm L=1350 mm
F [N]
450
L [mm]
1350
B [mm]
25
D [mm]
3
m [kg]
2,1
Article number
Description
THG30 rack 3 mm L=1451 mm
F [N]
450
L [mm]
1451
B [mm]
25
D [mm]
3
m [kg]
2,2
Article number
Description
THG30 rack 3 mm L=1551 mm
F [N]
450
L [mm]
1551
B [mm]
25
D [mm]
3
m [kg]
2,4
Article number
Description
THG30 rack 3 mm L=1652 mm
F [N]
450
L [mm]
1652
B [mm]
25
D [mm]
3
m [kg]
2,5
Article number
Description
THG30 rack 3 mm L=1752 mm
F [N]
450
L [mm]
1752
B [mm]
25
D [mm]
3
m [kg]
2,7
Article number
Description
THG30 rack 3 mm L=1852 mm
F [N]
450
L [mm]
1852
B [mm]
25
D [mm]
3
m [kg]
2,8
Article number
Description
THG30 rack 3 mm L=1953 mm
F [N]
450
L [mm]
1953
B [mm]
25
D [mm]
3
m [kg]
3,0
Multiple options available upon request
Gear rack bent inside/outside
| Article | Description | R [mm] |
| P.THG30.R1000.BIN | THG30 bend R=1000 inside | 1000 |
| P.THG30.R1200.BIN | THG30 bend R=1200 inside | 1200 |
| P.THG30.R1400.BIN | THG30 bend R=1400 inside | 1400 |
| P.THG30.R1500.BIN | THG30 bend R=1500 inside | 1500 |
| P.THG30.R1600.BIN | THG30 bend R=1600 inside | 1600 |
| P.THG30.R1800.BIN | THG30 bend R=1800 inside | 1800 |
| P.THG30.R1000.BUI | THG30 bend R=1000 outside | 1000 |
Window bracket
| Article | Description | m [kg] |
| P.THG30.RB | THG30 aluminium window bracket | 0,06 |
Slide bearing plate right
| Article | Description | A [mm] | L [mm] | m [kg] |
| P.GL100.R.L100 | Slide bearing plate 1" R A52 L100 mm | 52 | 100 | 0,14 |
| P.GL100.R.L120 | Slide bearing plate 1" R A72 L120 mm | 72 | 120 | 0,17 |
| P.GL100.R.L140 | Slide bearing plate 1" R A92 L140 mm | 92 | 140 | 0,19 |
| P.GL100.R.L150 | Slide bearing plate 1" R A102 L150 mm | 102 | 150 | 0,20 |
Article number
Description
Slide bearing plate 1" R A52 L100 mm
A [mm]
52
L [mm]
100
m [kg]
0,14
Article number
Description
Slide bearing plate 1" R A72 L120 mm
A [mm]
72
L [mm]
120
m [kg]
0,17
Article number
Description
Slide bearing plate 1" R A92 L140 mm
A [mm]
92
L [mm]
140
m [kg]
0,19
Article number
Description
Slide bearing plate 1" R A102 L150 mm
A [mm]
102
L [mm]
150
m [kg]
0,20
Drive systems for ventilation
Controlled ventilation is a must for an optimal climate in wide-span greenhouses. Ventilation is realised by means of continuous windows in the ridge of the greenhouse or by roll-up walls. We have the knowledge, expertise and extensive product range to contribute to an optimal climate for the best results.
De Gier Drive Systems
+ 31 174 29 20 89