HKK 120 right angle gearbox
Article properties
Article number
P.HKK120.D25.D100
Description
HKK 120 right angle gearbox
Nozzle [Nm]
120
i [-]
1
L1 [mm]
-
L2 [mm]
-
m [kg]
8
Article Information
This HKK120 has the following features:
- Equipped with a through hollow shaft and a capped solid shaft.
- The through hollow shaft has an outer diameter of 42 mm, inner diameter 36 mm tbv coupling with 1" drive tube.
- The branched shaft has a diameter of ø25 mm for 1" shaft or special couplings.
- B08 Z16 pipe bolt coupling for 1" drive pipe which allows the individual drive line of the ventilation system.
Articles
Description
HKK 120 right angle gearbox
m [kg]
8
Nozzle [Nm]
120
i [-]
1
L1 [mm]
-
L2 [mm]
-
Boostfactor
Description
HKK120 gearbox + mounting plate
m [kg]
8.5
Nozzle [Nm]
120
i [-]
1
L1 [mm]
72
L2 [mm]
134
Boostfactor
Description
HKK120 gearbox + mounting plate long
m [kg]
8.5
Nozzle [Nm]
120
i [-]
1
L1 [mm]
100
L2 [mm]
162
Boostfactor
| Article | Description | Nozzle [Nm] | i [-] | L1 [mm] | L2 [mm] | m [kg] |
| P.HKK120.D25.D100 | HKK 120 right angle gearbox | 120 | 1 | - | - | 8 |
2 P.HKK120.D25.D100 11 HKK 120 right angle gearbox 12 13 P.HKK120.D25.D100.jpg 14 10 CAT_P.HKK120.D25.D100_2D.gif | ||||||
| P.HKK120.D25.D100.MP | HKK120 gearbox + mounting plate | 120 | 1 | 72 | 134 | 8.5 |
2 P.HKK120.D25.D100.MP 11 HKK120 gearbox + mounting plate 12 13 P.HKK120.D25.D100.jpg 14 10 CAT_P.HKK120.D25.D100_2D.gif | ||||||
| P.HKK120.D25.D100.02.MP | HKK120 gearbox + mounting plate long | 120 | 1 | 100 | 162 | 8.5 |
2 P.HKK120.D25.D100.02.MP 11 HKK120 gearbox + mounting plate long 12 13 P.HKK120.D25.D100.jpg 14 10 CAT_P.HKK120.D25.D100_2D.gif |
General Information
The angled gearbox HKK120 Nm (1:1) is used in the THG30 drive system and allows a driven shaft to branch off at right angles. The input shaft of the HKK120 is hollow so that it can be slid over the central 1" drive shaft. The hollow through-shaft is connected to the central drive shaft with two M8 bolts. The solid PTO shaft is mounted to the 1" PTO shaft with an M8 bolt.
De Gier Drive Systems
+ 31 174 29 20 89